BS EN 10106-1996 Cold rolled non-oriented electrical steel sheet and strip delivered in the fully p
|
ID： |
28E91935CFEA48E0912088657016B81C |
|
文件大小(MB)： |
0.11 |
|
页数： |
18 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10106 : 1996,The European Standard EN 10106 : 1995 has the status of a,British Standard,ICS 29.040.10; 77.140.50,NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW,Cold rolled non-oriented,electrical steel sheet and strip,delivered in the fully,processed state,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:34:58 BST 2006, Uncontrolled Copy, (c) BSI,This British Standard, having,been prepared under the,direction of the Engineering,Sector Board, was published,under the authority of the,Standards Board and comes into,effect on,15 September 1996,ó BSI 1996,The following BSI references,relate to the work on this,standard:,Committee reference ISE/NFE/5,Draft for comment 93/310710 DC,ISBN 0 580 25828 9,BS EN 10106 : 1996,Amendments issued since publication,Amd. No. Date Text affected,Committees responsible for this,British Standard,The preparation of this British Standard was entrusted to Technical Committee,ISE/NFE/5 Magnetic alloys and steels, upon which the following bodies were,represented:,Association of Manufacturers Allied to the Electrical and Electronic,Industry (BEAMA Ltd.),British Steel Industry,Department of Trade and Industry (National Physical Laboratory),Electricity Supply Industry in England and Wales,Electronic Components Industry Federation,GAMBICA (BEAMA Ltd.),Institute of Physics,Rotating Electrical Machines Association (BEAMA Ltd.),Sunderland Polytechnic (Magnet Centre),Transmission and Distribution Association (BEAMA Ltd.),Wolfson Centre for Magnetic Technology,Co-opted members,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:34:58 BST 2006, Uncontrolled Copy, (c) BSI,BS EN 10106 : 1996,ó BSI 1996 i,Contents,Page,Committees responsible Inside front cover,National foreword ii,Foreword 2,Text of EN 10106 3,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:34:58 BST 2006, Uncontrolled Copy, (c) BSI,ii ó BSI 1996,BS EN 10106 : 1996,1) In preparation.,National foreword,This British Standard has been prepared by Technical Committee ISE/NFE/5 and is the,English language version of EN 10106 : 1995, published by the European Committee for,Standardization (CEN).,This British Standard supersedes BS 6404 : Section 8.4 : 1996 which is withdrawn. The,essential part of annex D of BS 6404 : Section 8.4 : 1996 is contained in BS 6404 :,Part 20 : 1996, Resistance and temperature classification of insulation coatings.,Cross-references,Publication referred to Corresponding British Standard,BS 4727 Glossary of electrotechnical, power,telecommunication, electronics, lighting and colour terms,Part 1: Terms common to power, telecommunications and,electronics,IEC 50 (121) : 1978 Group 01 : 1983 Fundamental terminology,IEC 50 (221) : 1990 Group 07 : 1991 Magnetic materials and components,IEC 404-1 : 1979,IEC 404-2 : 1978,(Euronorm 118)1),BS 6404 : Magnetic materials,Part 1 : 1984 Classification,Part 2 : 1996 Methods of measurement of the magnetic,properties of electrical steel sheet and strip by means of an,Epstein frame,IEC 404-3 : 1992 Part 3 : 1992 Methods of measurement of the magnetic,properties of magnetic sheet and strip by means of a single,sheet tester,EN 10021 : 1993 BS EN 10021 : 1993 General technical delivery requirements,for steel and iron products,EN 10027-1 : 1992,BS EN 10027 : Designation systems for steel,Part 1 : 1992 Steel names, principal symbols,EN 10027-2 : 1992 Part 2 : 1992 Steel numbers,EN 10204 : 1991 BS EN 10204 : 1991 Metallic products. Types of inspection,documents,EN 102511) BS EN 10251 : Magnetic materials. Methods of determination,of the geometrical characteristics of electrical steel sheet and,strip1),Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:34:58 BST 2006, Uncontrolled Copy, (c) BSI,CEN,European Committee for Standardization,Comite?Europe?en de Normalisation,Europaèisches Komitee fuè r Normung,Central Secretariat: rue de Stassart 36, B-1050 Brussels,ó 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to,CEN and its members.,Ref. No. EN 10106 : 1995 E,EUROPEAN STANDARD EN 10106,NORME EUROPE?ENNE,EUROPAè ISCHE NORM December 1995,ICS 29.040.10; 77.140.50,Descriptors: Cold rolled products, metal plates, magnetic alloys, magnetic circuits, steels, classifications, designation, delivery, magnetic,properties, geometric characteristics, physical properties, acceptance tests, quality,English version,Cold roll……
……